roduct Features
• The worktops are completely self-supporting and do not require structural supporting frames.
• The product features a rim against overflows along all four sides; any worktop can be used individually or as a part of a combination together with others.
• In order to have non standard length tops with a rim against over¬flow on all four sides, the worktops can be cut and assembled “side by side”.
• The worktops are supplied with a frontal glazed edge and the remaining edges can be cut to the desired size; the two short ones are finished with a special cold-applied enamelling of the same hue of the worktop.
• Worktops can be supplied with finished and glazed edges (ie. for central benches).
• It is possible to make holes on the worktop surface for sinks of various shapes, standard or not, holes for the fittings and any kind of opening with glazed or unglazed cut edges.
• In order to optimize packing and decrease transportation costs, sinks are normally supplied as detached part. On demand, they can be assembled together.
• Special shaped worktops can be also produced manufacturing dedicated moulds.
陶瓷台面