通过认证 
5100mz-Plus是性价比很高的精密仪器，Z轴偏转1-2µm时刀片可预先调整为以10µm/s
的速度运动。切片截面厚度步长为0.001mm。自身配备的Z轴就能对其进行校准验证。
包括神经组织，心脏，肺或更多脏器用于视觉修补的切片在内，所有类型的切片都可以
当次微米Z轴以各种振动速度和振幅偏转1-2µm时，5100mz-Plus每次都能得到完美的切片，
新用户界面操作简单，功能齐全。5100mz与7000smz-2按键操作相似。多种功能包括简单操作按钮或根据自身的参数选择来设置一系列可变的程序化参数、菜单。
通过使用冰水浴或电子的热电冷却器能冷却组织。其他选择包括使用LED冷光源或者切片时使用放大镜或体视镜能更清晰的观察。
新型5100mz系列振动超薄切片机，与优质的7000smz-2共享用户界面，方便用户自行设置一系列可调参数。使用时可以完全手动操作，或者选择半自动化的“切片窗口”模式（自动存储切片起始和结束的位点）。
|
5100 Series: Control box on umbilical cord ideal for operation in an isolated environment |
|
|
5100mz-Plus最适合长时间保持切片活性，比如应用于电生理学领域进行数据记录。通过调节刀片架和光学校准装置，用户能调整Z轴上的刀片偏转2µm 。Z轴偏转越小越能减少颤动，从而将切片表面的损伤降到最低，最大限度的保留切片表面的细胞活性。
5100mz-Plus and 5100mz:
l 只有5100mz-Plus具有Z轴校准功能
l Z轴机械误差不到10µm
l 振动速度50-80Hz
l 振幅范围0.5mm-1.5mm
l 可精确控制刀片行进速度（最小速度：0.1mm/sec）
l 设置刀片行进的起点和终点位置
l 遥控器可以灭菌使用
l 冰水浴锅很容易移除进行清洁
l 可选择冷光源和放大器观察更清晰
l 可选择半导体冷却锅
l 操作，手动设置都能完全使用遥控器
基本参数：
|
规格 |
5100mz series |
|
Section thickness step size |
1µm |
|
Vertical (Z-Axis) calibration device |
'Opti-cal' included as standard for 5100mz-Plus Optional extra for 5100mz |
|
Optimal Z-axis Deflection |
≈ 5-8µm (2.0µm ± 0.1 with calibration upgrade kit) |
|
Max specimen size |
33x50x19 |
|
Maximum (vertical) travel of bath table |
19mm |
|
Memory to store section thickness |
Yes |
|
Multiple user settings |
8 different |
|
Cutting head advance speed while slicing |
From a minimum of -1.00mm/sec, through zero to a maximum of +1.00mm/sec |
|
Cutting head advance speed resolution while slicing |
From a minimum of -1.00mm/sec, through zero to a maximum of +1.00mm/sec |
|
Cutting head advance speed resolution while slicing |
0.10mm/sec |
|
Cutting head advance speed max (fast mode when not slicing) |
+/- 2.0mm/sec |
|
Specimen retraction as blade retracts |
Yes |
|
Cutting head retraction speed (fast mode) |
2.0mm/sec |
|
Operating Modes |
Manual or semi-auto 'slice window' |
|
Blade oscillation frequency range (dependent on amplitude) |
50-80Hz |
|
Frequency step size |
5Hz |
|
Blade oscillation amplitude |
Minimum: 0.5mm (nominal) Maximum:1.5mm (nominal) |
|
Amplitude step size |
0.5mm (nominal) |
|
Cooling options |
Ice bath or optional Model 7610A Tissue Bath Cooler |
|
Power requirements |
90-264 VAC 50/60Hz (switch mode PSU) |
|
Power rating |
65W |
|
Fuse rating (115v or 230v) |
T2A 250VAC |
|
Light source |
Powered from 5100mz |
|
Dimensions |
350mm W x 450mm D x 350mm H (excluding magnifier/light source) |
|
Weight |
15kg |
|
Packaged weight & dimensions |
Box wt & dims TBA |
Vibrating Microtomes
7000smz-2, 5100mz-Plus and 5100mz
Top-of-the-range, high precision, vibrating microtomes... the finest slicers in the world for all specimen preparation.
The 7000smz-2 unit with a Z-axis deflection of Sub-Micron and a blade advance controllable to 10 microns/second. The 5100mz-Plus and 5100mz are very competitively priced high precision units with a Z-axis deflection of only 1-2 microns and a blade advance controllable to 10 microns/sec. On all units the section thickness step size is 0.001mm. The 7000smz-2 and 5100mz-Plus are supplied with their own Z-axis calibration verifier.
All types of sectioning is possible including sectioning for visual patching of neurological tissue, heart, and lung, and much more...
The effect of excessive Z-axis deflection on the health and viability of the tissue preparation has been much discussed since the publication of Jonas et al (2003) and the 7000smz-2 will now deliver perfect sections every time with sub-micron Z-axis deflection across a wide range of vibration speeds and amplitudes. The affordable 5100mz-Plus offers almost the same features with Z-axis deflection of 1-2 microns at all vibration speeds and amplitudes, which is less than most other microtomes on the market.
当次微米Z轴以各种振动速度和振幅偏转1-2µm时，5100mz-Plus每次都能得到完美的切片，
新用户界面操作简单，功能齐全。5100mz与7000smz-2按键操作相似。多种功能包括简单操作按钮或根据自身的参数选择来设置一系列可变的程序化参数、菜单。
The all-new user interface is both easy to use and versatile. The 7000smz-2 and both 5100mz models offer similar operation at the press of a button. The versatility includes simple operation at the push of a button or a range of changeable and programmable parameters and a menu enables the settings of your own preferences.
The 7000smz-2 also gives you longevity of performance; in other words it not only gives submicron performance out-of-the-box, but the advance vibrating mechanism does not contain bearings and other components subject to wear. Consequently it will retain the sub-micron Z-axis deflection performance for years to come, giving you consistency in your biological preparation.
通过使用冰水浴或电子的热电冷却器能冷却组织。其他选择包括使用LED冷光源或者切片时使用放大镜或体视镜能更清晰的观察。
新型5100mz系列振动超薄切片机，与优质的7000smz-2共享用户界面，方便用户自行设置一系列可调参数。使用时可以完全手动操作，或者选择半自动化的“切片窗口”模式（自动存储切片起始和结束的位点）。
Tissue cooling is accomplished by the use of either an ice-water bath or an electronically comtrolled thermo-electric cooler. Other options include a LED cold light source and a magnifier or a stereoscope for clear observation whilst slicing.
The new 5100mz series Vibrating Microtomes share the user interface with the premium 7000smz-2, placing a wide range of adjustable parameters at the user's fingertips. Use in fully manual or the semi-automated "slice window" mode which automatically remembers the start and finish position of the slice.
|
|
|
5100 Series: Control box on umbilical cord ideal for operation in an isolated environment |
|
|
5100mz-Plus最适合长时间保持切片活性，比如应用于电生理学领域进行数据记录。通过调节刀片架和光学校准装置，用户能调整Z轴上的刀片偏转2µm 。Z轴偏转越小越能减少颤动 ，从而把对切片表面的损伤降到最低，进而最大限度的保留切片表面的细胞活性。
5100mz-Plus and 5100mz:
只有5100mz-Plus具有Z轴校准功能
Z轴机械误差不到10µm
振动速度50-80Hz
振幅范围0.5mm-1.5mm
可精确控制刀片行进（最小速度：0.1mm/sec）
设置刀片行进的起点和终点位置
遥控器可以灭菌使用
冰水浴锅很容易移除进行清洁
可选择冷光源和放大器观察更清晰
可选择半导体冷却锅
操作，手动设置都能完全使用遥控器
5100mz-Plus
The 5100-Plus is perfect for those who need to keep slices viable for longer, e.g. for electrophysiological field recordings. The user can calibrate the Z-axis deflection of the blade to 2µm with the adjustable blade holder and "optical" calibration device. Minimal Z-axis deflection reduces the "chatter" and minimizes damage to the slice surface, leading to greater viability of the cells on the slice surface.
5100mz-Plus and 5100mz:
· Includes the Z-axis calibration unit (5100mz-Plus only)
· Mechanism Z-axis error of less than 10µm
· Vibration speeds from 50 to 80Hz
· Amplitudes from 0.5mm to 1.5mm
· Fine control of the blade advance (min. 0.1mm/sec)
· Set start and stop position of blade travel
· Remote controls allowing for sterile use in culture hood
· Ice water bath easily removed for cleaning
· Optional cold light and magnifier for clear observation
· Optional Peltier cooled bath
· Contro; handset allows full remote control
|
Specifications |
7000smz-2 |
5100mz series |
|
Section thickness step size |
1µm |
1µm |
|
Vertical (Z-Axis) calibration device |
'Opti-cal' included as standard |
'Opti-cal' included as standard for 5100mz-Plus |
|
Optimal Z-axis Deflection |
Sub-µm (± 0.1µm) |
≈ 5-8µm (2.0µm ± 0.1 with calibration upgrade kit) |
|
Max specimen size |
33x50x19 |
33x50x19 |
|
Maximum (vertical) travel of bath table |
19mm |
19mm |
|
Memory to store section thickness |
Yes |
Yes |
|
Multiple user settings |
8 different |
8 different |
|
Cutting head advance speed while slicing |
From a minimum of -1.00mm/sec, through zero to a maximum of +1.00mm/sec |
From a minimum of -1.00mm/sec, through zero to a maximum of +1.00mm/sec |
|
Cutting head advance speed resolution while slicing |
0.01mm/sec |
0.10mm/sec |
|
Cutting head advance speed max (fast mode when not slicing) |
+/- 4.0mm/sec |
+/- 2.0mm/sec |
|
Specimen retraction as blade retracts |
Yes |
Yes |
|
Cutting head retraction speed (fast mode) |
4.0mm/sec |
2.0mm/sec |
|
Operating Modes |
Manual, semi-auto 'slice window' or fully automated 'profile repeat' |
Manual or semi-auto 'slice window' |
|
Blade oscillation frequency range (dependent on amplitude) |
50-120Hz |
50-80Hz |
|
Frequency step size |
5Hz |
5Hz |
|
Blade oscillation amplitude |
Minimum: 0.5mm (nominal) |
Minimum: 0.5mm (nominal) |
|
Amplitude step size |
0.25mm (nominal) |
0.5mm (nominal) |
|
Cooling options |
Ice bath or optional Model 7610A Tissue Bath Cooler |
Ice bath or optional Model 7610A Tissue Bath Cooler |
|
Power requirements |
115VAC 60Hz or 230VAC 50Hz |
90-264 VAC 50/60Hz |
|
Power rating |
100W |
65W |
|
Fuse rating (115v or 230v) |
T2A 250VAC |
T2A 250VAC |
|
Light source |
100-240VAC 3W mains connection |
Powered from 5100mz |
|
Dimensions |
420mm W x 400mm D x 270mm H (excluding light source and microscope) |
350mm W x 450mm D x 350mm H (excluding magnifier/light source) |
|
Weight |
35kg |
15kg |
|
Packaged weight & dimensions |
Wooden crate 70 x 54 x 48cms, 55Kgs |
Box wt & dims TBA |
